SM 5-65 G147
Service
Tables
Confirms that the mechanical counter inside the inner cover is connected.
Meter Charge
5930
This SP operates a "meter click charge" that maintains a total counter for the
PCU, fusing unit, and other components. When this SP is switched on, the use of
the PCU, for example, is not monitored by the engine but the engine counter
continues to operate.
Finisher Stack Finisher Paper Stack to Shift Tray?
5961
0: OFF, 1: ON
Selects whether or not all stapled copies are sent to Shift Tray 1 when the
Two-Tray finisher is installed.
SP Print Mode SMC Print
5990
In the SP mode, press Copy Window to move to the copy screen, select the
paper size, then press Start. Select A4/LT (Sideways) or larger to ensure that all
the information prints. Press SP Window to return to the SP mode, select the
desired print, and press Execute.
001 All (Data List) All (Data List)
002 SP (Mode Data Li) SP (Mode Data List)
004 Logging Data Logging Data
005 Diagnostic Repor Diagnostic Report
006 Non-Default
Non-Default (Prints only SPs set to values other than
defaults.)
007 NIB Summary NIB (Network Interface Board) Summary
SP6-xxx: Peripherals
Staple Adj Staple Position Adjustment
6105
[–3.5~+3.5 / 0.0 / 0.5 mm step]
To Next Page
Loading...
