G147 5-66 SM
Adjusts the staple position in the main scan direction when using the two-tray
finisher.
Punch Pos Adj Punch Hole Position Adjustment
6113
Adjusts the punch hole position.
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches
for Northern Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
001 2-Hole [–7.5~+7.5 / 0 / 0.5 mm steps]
002 3-Hole [–7.5~+7.5 / 0 / 0.5 mm steps]
SP7-xxx: Data Log
Main M Op Time Main Motor Operation Time
7001
Display: 000 0000~999 9999 min
The number of prints and drive time for drum revolutions can be obtained by
counting the main motor revolution time. If the amount of time required for the
drum to revolve to print 1 copy increases, this data combined with the number of
copies can be used to analyze problems and could be useful for future product
development.
SC Counter Total SC Counter
7401
Displays the total number of service calls that have occurred. Display range:
0000~9999
7403 Latest10SCLog SC History (Latest 10 only)
001 Latest
002 Latest 1
003 Latest 2
004 Latest 3
Displays the most recent service calls successive
groups of 10.
To Next Page
Loading...
