6. Press [Login].
• If authentication fails, the "Cannot log in." message appears. Check that the Login User Name and
Login Password are correct.
• When User Code Authentication is active, a different screen appears. See page 134 "User Code
Authentication Using the Control Panel".
Logging Out Using the Control Panel
This section explains the procedure for logging out the machine when Basic Authentication, Windows
Authentication, or LDAP Authentication is set.
• To prevent use of the machine by unauthorized persons, always log out when you have finished
using the machine.
1. Press the logged-in user icon on the top right on the screen.
2. Press [OK].
Logging In Using an IC Card
Log in to the machine by waving an IC card over the machine when Quick Card Authentication is
specified.
4. Getting Started
136
To Next Page
Loading...
