Message Cause Solution
"Insufficient Memory" A memory allocation error
occurred.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print
Quality:Advanced] in "Menu:",
and then select [Raster] in the
"Vector/Raster:" list. In some
cases, it will take a long time to
complete a print job.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn off the power and then back on
again. If the message appears
again, replace the RAM. For details
about replacing the RAM, contact
your service representative.
"Paper Type Error" The specified paper type
name is not set in the
machine.
Re-obtain the latest paper type
information set in the machine.
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration
Page in conjunction with the error log. For details about how to print the Configuration Page,
see "List / Test Print", Preparation.
Messages Displayed When You Use the Scanner Function
Messages displayed on the control panel when you use the scanner function
This section describes likely causes of and possible solutions for the error messages that appear on the
control panel. If a message not described here appears, act according to the message.
Message Cause Solution
"Cannot find the specified
path. Please check the
settings."
The destination computer name
or folder name is invalid.
Check whether the computer name
and the folder name for the
destination are correct.
11. Troubleshooting
446
To Next Page
Loading...
