Message Cause Solution
"Data Storage Error" You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file, or
to store a file in the
Document Server when the
hard disk was
malfunctioning.
Contact your service representative.
"Error has occurred." A syntax error, etc.,
occurred.
Check that the PDF file is valid.
"Exceeded Max. Stored
Files"
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file,
the maximum file capacity
was exceeded.
Delete unneeded files stored on the
machine.
"Exceeded Max. Stored
Pages"
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file,
the maximum page
capacity was exceeded.
Delete unneeded files stored on the
machine.
Reduce the number of pages to print.
"File system is full." PDF file does not print out
because the capacity of
the file system is full.
Delete all unnecessary files from the
hard disk, or decrease the file size
sent to the machine.
"Folding Unit Error." There is a problem with the
multi-folding unit.
Contact your service representative.
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under
[Host Interface], select [I/O
Buffer], and then set the
maximum buffer size to a larger
value.
• Reduce the number of files
being sent to the machine.
When Messages Appear
445
To Next Page
Loading...
