Printing on Envelopes
Configure the paper settings appropriately using both the printer driver and the control panel.
• To print on envelopes, load them into the optional wide Large Capacity Tray (LCT) or Tray A, and
be sure to specify an appropriate paper type. See page 207 "Recommended Paper Sizes and
Types".
Configuring envelope settings using the control panel
1. Load envelopes in the paper tray.
About how to load envelopes, see page 207 "Recommended Paper Sizes and Types".
2. Press [Tray Paper Settings] on the upper left of the screen.
3. Select the paper tray on the [Paper Tray] tab in which the envelopes are loaded.
When specifying the paper type or weight of envelopes as you want, check that [Manual Setting]
is selected.
When specifying the paper settings for envelopes by allocating from a registered custom paper,
select [Allocate from Media Catalog], select custom paper to use, and then press [Allocate to
Tray].
When specifying the setting values manually, proceed to the next step. After allocating the setting
values from the media catalog, proceed to Step 9.
4. Press [Edit the Settings].
5. Press [Paper Size], and select the envelope size.
6. Press [Paper Weight], and select the paper weight of the envelope.
7. Press [Paper Type], and select the appropriate item.
8. Press [Save Paper].
9. Press [Home] ( ) at the bottom of the screen in the center.
Printing on envelopes using the printer driver
When using the PCL 6 printer driver
1. Click the WordPad menu button in the upper left corner of the window, and then click
[Print].
2. Select the printer you want to use.
8. Print
356
To Next Page
Loading...
