Specifying the path by browsing the network for destinations
1. Press [Manual Entry].
2. Press [SMB].
3. Press [Browse Network] under the path name field.
If the message "Cannot find the specified path. Please check the settings." appears, see page 446
"Messages displayed on the control panel when you use the scanner function".
4. Select the domain or workgroup in which the destination folder is located.
5. Select the client computer that has the destination folder.
If you cannot find the computer you are looking for, press [Up One Level] and browse that level.
If authentication is required to access the selected computer, the authentication screen appears. To
authenticate, enter the user name and password.
6. Select the destination folder.
When the selected folder has sub-folders, the sub-folders list appears.
If you cannot find the destination folder, press [Up One Level], and then search for the folder at that
level.
7. Press [OK] twice.
• Up to 100 computers or shared folders can be displayed.
• The machine may fail to transfer the file if you do not have the write privileges for the shared folder
or there is not enough free hard disk space.
Sending files to an FTP server
This section explains how to specify destinations when sending files to an FTP server.
9. Scan
370
To Next Page
Loading...
