For example, to search for "ABC", enter "A".
• [End Word]: The names which end with the entered character or characters are targeted.
For example, to search for "ABC", enter "C".
• [Exact Match]: The names which correspond to an entered character or characters are
targeted.
For example, to search for "ABC", enter "ABC".
• [Include one Word]: The names which contain an entered character or characters are
targeted.
For example, to search for "ABC", enter "A", "B", or "C".
• [Exclude Words]: The names which do not contain an entered character or characters are
targeted.
For example, to search for "ABC", enter "D".
• When the specified destination is updated using the Central Management function, the spooled
documents are sent to the destination after updating.
• For details about Central Management, see "Administrator Tools", Device Management.
Entering an E-mail Address Manually
1. Press [Manual Entry].
2. Enter the e-mail address.
3. Press [OK].
• Depending on the security settings, [Manual Entry] may not be displayed.
• To change a registered destination e-mail address, press [Edit] to the left of the destination field to
display the soft keyboard, use the soft keyboard to enter the new address, and then click [OK].
• The e-mail address that is entered directly can be registered in the machine's address book. For
details, see page 381 "Registering a destination in the address book manually".
9. Scan
378
To Next Page
Loading...
