Messages Displayed When You Use the Copy/Document Server Function
• If you cannot make copies as you want because of the paper type, paper size or paper capacity
problems, use recommended paper. For details about recommended paper, see page 207
"Recommended Paper Sizes and Types".
Message Cause Solution
"Adjusting the temperature
of the binding glue."
The binding glue is being
heated.
Wait until the glue has reached the
correct temperature for binding.
"Cannot delete the folder
because it contains locked
files. Please contact the file
administrator."
The folder cannot be deleted
because it contains a locked
original.
Unlock the locked original to delete it.
For details about locked files, see
"Unlocking Stored Files", Security
Guide.
"Cannot detect original
size."
The original placed on the
exposure glass is a non-
standard size.
• Place the original on the exposure
glass again. Face the original
down.
• If the machine cannot detect the
size of the original, specify the
size manually - do not use Auto
Paper Select mode or the Auto
Reduce/Enlarge function. For
details about specifying the
settings, see page 164 "Sizes
Detectable with Auto Paper
Select".
"Cannot detect original
size."
No original has been
placed, or the original
placed on the exposure
glass is a nonstandard size.
• Place the original correctly.
• Specify the original size.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the Auto
Document Feeder (ADF) triggers
the automatic original size
detection process. Lift the ADF 30
degrees or more.
When Messages Appear
427
To Next Page
Loading...
Need help?
General
