Menu Items and Functions
Machine: Image Position
For details about the following items, see page 284 "Machine: Image Position".
No. Item Description
0101 Image Position: Across
Feed: Side 1
Adjust the image position (up and down) on side 1
across the feeding direction.
0102 Image Position: Across
Feed: Side 2
Adjust the image position (up and down) on side 2
across the feeding direction.
0103 Image Position: With Feed:
Side 1
Adjust the image position (left and right) on side 1 along
the feeding direction.
0104 Image Position: With Feed:
Side 2
Adjust the image position (left and right) on side 2 along
the feeding direction.
0105 Perpendicularity
Adjustment
Adjust the image skew (perpendicularity) across the
feeding direction.
0106 Switch Paper Edge
Detection Sensor
Specify the level for detecting the paper edge for
correcting the image position along the feeding
direction.
Machine: Image Quality
For details about the following items, see page 290 "Machine: Image Quality".
No. Item Description
0201 Execute Image Quality
Adjustment
Execute image control or color registration adjustment
manually.
0202 Maximum Image Density Adjust the toner adhesion amount to the intermediate
transfer belt during the image density adjustment.
0203 Line Width Adjust the intensity of the laser for rasterizing the image
data.
0204 Density Difference: Across
Feed
Adjust the vertical density deviation of images in the
direction perpendicular to the paper feed direction.
Machine: Paper Feed/ Output
For details about the following items, see page 293 "Machine: Paper Feed/ Output".
7. Adjustment Settings for Operators
276
To Next Page
Loading...
