Sending Files to a Shared Network Folder
• When sending to a shared folder on a network, see page 359 "Preparation for Sending by Scan
to Folder" and confirm the following items for the destination computer:
• Destination computer name
• Destination computer's user name and password
• Destination shared folder name
• Depending on the operating system of the client computer, access to the shared folder may require
authentication.
You can send a file to a shared folder over the network by any of the following methods:
• Enter the path to the destination directly
• Specify the path by browsing the network for the destination
• If the firewall of an antivirus program is active, you may not be able to specify a shared folder on
the computer as a folder destination. If this is the case, see the antivirus program's Help.
• If Windows firewall is active and you cannot specify a shared folder on the computer as a folder
destination, the machine may be able to communicate with the computer by changing the
exceptions of the Windows firewall. For details, see Windows Help.
Entering the path to the destination manually
1. Press [Manual Entry].
2. Press [SMB].
3. Press [Manual Entry] on the right side of the path field.
9. Scan
368
To Next Page
Loading...
