3. Press [Paper Size].
4. Specify the envelope size, and then press [OK].
5. Press [Paper Type].
6. Select [Envelope], and then press [OK].
7. Place the originals, and then press the [Start] key.
• For details about using envelopes, see page 157 "Copying onto Envelopes".
Copying onto Envelopes from the Wide Large Capacity Tray
Before using this function, specify the paper size and type under [Tray Paper Settings]. For the paper
type, select [Envelope]. For details, see page 241 "Changing Tray Paper Settings".
1. Select the paper tray where the envelopes are loaded.
2. Place the originals, and then press the [Start] key.
• For details about using envelopes, see page 157 "Copying onto Envelopes".
5. Copy
158
To Next Page
Loading...
