Setting Items Values Default Value
Paper Length 216 Default
1500 Sheets
1000 Sheets
Default
216<Paper Length 432 Default
1000 Sheets
500 Sheets
Default
432<Paper Length Default
500 Sheets
Default
Finishing: Fold
0701 Z-fold Position 1
Adjust the fold position of the end segment (S) when using the fold unit.
Press [ ] to increase and [ ] to reduce (S).
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Paper feed direction
S
L
DWP561
7. Adjustment Settings for Operators
320
To Next Page
Loading...
