Changing the Number of Print Copies while Printing Is in Progress
You can change the number of sets during printing.
• This function can be used only when the Sort function is selected in the printing conditions.
1. Press the [Stop] key.
2. Enter the number of sets anew with the number keys.
3. Press [Continue Printing].
Printing will be resumed.
• The number of sets you can enter in Step 2 differs depending on when the [Stop] key is pressed.
Sample Print
When the number of sets is massive, you can print a single set in advance to check the printing order
and the printing conditions of the selected documents.
10. Document Server
408
To Next Page
Loading...
