Ricoh PRO C7200S - Notes on Configuring the Perfect Binding

Required finished size Book block Cover
A5 B5 JIS B4 JIS
11 × 15
8
1
/
2
× 11 9 × 12
*1
13 × 19
1
/
5
13 × 19
12 × 18
12
3
/
5
× 19
1
/
5
12
3
/
5
× 18
1
/
2
5
1
/
2
× 8
1
/
2
7
1
/
4
× 10
1
/
2
10.5 × 14.5
*1
*1
Specify the custom size in [Tray Paper Settings].
Notes on Configuring the Perfect Binding
Conditions where Perfect Binding will be canceled or a job reset may occur
Perfect Binding will be canceled or a job reset may occur if:
• The machine is configured to continue printing manually.
• [Auto Continue] is specified.
• Tray A is specified as the source tray.
• [Driver / Command] is selected in [Tray Setting Priority] for the specified source tray.
• Cover Sheets is specified.
• Slip Sheets is specified.
• Separation Sheets is specified.
• The staple function is specified.
• The punch function is specified.
• The fold function is specified.
• Paper is ejected with its printed side facing up.
• Ring Binding is specified.
• Perfect binder is not attached.
• Perfect Binding cannot be used for the selected tray, paper size, or paper type.
• Perfect Binding cannot be used for the selected paper orientation.
• The number of sheets exceeds the maximum Perfect Binding number.
• Sheets of paper to be bound using Perfect Binding are thicker than 200 sheets of plain paper.
3. Useful Functions
28