Fold
Printed documents can be folded using the optional Finisher and multi-folding unit or the optional
Booklet Finisher attached to the machine.
• For details about the optional units required for this function, see "Functions Requiring Optional
Configurations", Device Management.
Specifying the Fold Settings
If the PCL 6 printer driver is used, the fold function can be specified in the Finishing menu on the
Detailed Settings tab. If the PCL 5c printer driver is used, Z-fold can be specified in the Setup tab.
For printing methods, see the printer driver Help.
• Collate is automatically enabled if Half Fold or Multi-sheet Fold is specified.
Using the Multi-Folding Unit
Printed documents can be folded using the optional Finisher and multi-folding unit attached to the
machine.
You can select the fold type from the following six types: Z-fold, Half Fold, Letter Fold-in, Letter Fold-out,
Double Parallel, and Gate Fold.
If you select the [Multi-sheet Fold] check box in the printer driver, you can apply Half Fold, Letter Fold-
in, or Letter Fold-out to up to three sheets of paper of the same size at one time.
3. Useful Functions
32
To Next Page
Loading...
