7. Place the originals.
8. Press the [Start] key.
• You cannot use the following copy paper with this function:
• Translucent paper
• Label paper (adhesive labels)
• Envelopes
• Tab stock
• Magnet paper
• Clear file folder
• Carbonless paper
• When an odd number of originals are placed in the ADF, the back of the last page of copied
paper is blank.
• For details about the sizes, orientations, and weights of paper that can be used in the Duplex
function, see "Specifications for the Main Unit", Specifications.
• You can specify the margins under [Edit] in User Tools. For details, see "Edit", Preparation.
Specifying the Original and Copy Orientation
Select the orientation of the originals and copies if the original is two-sided or if you want to copy onto
both sides of the paper.
• Top to Top
• Top to Bottom
1. Press [Orientation].
Duplex Copying
149
To Next Page
Loading...
