1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in the two-tray wide LCT by adjusting the positions of side
fence and end fence. For details, see page 199 "Changing the Paper Size in the Two-tray Wide
Large Capacity Tray".
• You can load envelopes in the two-tray wide LCT. When loading envelopes, place them in the
correct orientation. For details, see page 235 "Envelopes".
• When you are using a special printing feature such as banner printing, cover page, and separation
sheets, the indicator on the front side of the tray remains lit until printing is completed. You cannot
reload paper while the indicator remains lit.
Attaching the small tab end fence to the two-tray wide Large Capacity Tray
When loading the following paper, attach the small tab end fence:
Loading Paper
181
To Next Page
Loading...
