Print side Tray 1
Tray 2 or A3/11 ×
17 tray unit
Multi bypass tray
(Tray A) or wide LCT
Two-sided
• In copier mode:
• For details about how to make two-sided copies, see page 147 "Duplex Copying".
• In printer mode:
• To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you must
specify [Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from one-sided to two-sided printing, one-
sided output after the first copy may be printed facing a different direction. To ensure all
paper is output facing the same direction, specify different input trays for one-sided and two-
sided printing. Note also that two-sided printing must be disabled for the tray specified for
one-sided printing.
• For details about how to make two-sided prints, see page 354 "Printing on Both Sides of
Sheets".
Loading Paper
189
To Next Page
Loading...
