Attaching the postcard side fences in the three-tray wide Large Capacity Tray
When loading paper that is 100.0 to 139.2 mm (3.94 to 5.49 inches) in vertical length, attach the
postcard side fences.
The three-tray wide LCT is equipped with two types of postcard side fences: the long type and the short
type. Use the longer pair for Tray 4 and the shorter pair for Trays 3 and 5.
1. Open the front cover of the three-tray wide LCT, and then pull the postcard side fences
and screws out.
2. Close the front cover.
3. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
4. Fit the indentation on the bottom of the postcard side fence with the limit mark into the
head of the screw on the bottom of the inner side fence.
5. Fit the hole on the top of the postcard side fence into the projection on the top of the side
fence.
Set the other postcard side fence to the front side fence in the same way.
6. Paper Specifications and Adding Paper
198
To Next Page
Loading...
