*4
When the banner sheet tray is installed, you cannot select paper sizes.
*5
You can print on paper whose size is between 210.0-330.2 mm (8.27-13.00 inches) vertically and
420.0-700.0 mm (16.54-27.55 inches) horizontally if the banner sheet tray is installed.
*6
When the banner sheet tray is attached, up to 800 sheets of paper whose horizontal length is 420.0
-700.0 mm (16.54 -27.55 inches) can be loaded and fed.
*7
When the banner sheet tray is installed, you cannot select paper types.
*8
The maximum number of sheets you can set at once depends on the paper's thickness and condition.
*9
The tab fence is required.
*10
Open the flaps, and load the envelopes with their flaps pointed toward the right side of the paper tray.
*11
Enter the sizes of the envelopes including their flap sizes using the Tray Paper Settings function.
*12
Sizes do not include flap sizes.
*13
Flatten curls so that they fit within the following guidelines.
52.3 - 299.9 g/m2 paper: Curl height 5 mm (0.2 inches) or below, R over 100 mm (3.94 inches).
300 - 400 g/m2 paper: Curl height 3 mm (0.12 inches) or below, R over 100 mm (3.94 inches).
*14
Flatten the curl on the envelope, then set the difference of the stack height of the bottom of the envelope
and the stack height of the flap portion to be 10 mm (0.4 inches) or below.
*15
Paper cannot be fed from the banner sheet tray.
Interposer
Paper type and weight Paper size Paper capacity
64.0–216.0 g/m
2
(17.1 lb.
Bond–79.9 lb. Cover)
Paper Weight 2–Paper
Weight 5
Paper sizes that can be detected
automatically:
A3 , A4 , A5 , B4 JIS ,
B5 JIS , 11 × 17 , 8
1
/
2
× 11
, 8 × 13 , 5
1
/
2
× 8
1
/
2
, 12
× 18
A3 , A4 , A5 , B4 JIS , B5
JIS , 11 × 17 , 8
1
/
2
× 11 ,
8 × 13 , 5
1
/
2
× 8
1
/
2
, 12 ×
18
200 sheets × 2
6. Paper Specifications and Adding Paper
230
To Next Page
Loading...
