• When printing in the Auto Paper Select mode, Auto Tray Switching switches between trays
that are configured for custom papers that meet all of the following conditions:
• The paper type is [Plain Paper] or [Recycled Paper] and both custom papers' paper types are
the same
• The paper weight is [Paper Weight 2] or [Paper Weight 3] and both custom papers' paper
weights are the same
• Both custom papers' paper sizes are the same
• If the specified size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size is not detected.
• If you want to use preprinted paper, contact your service representative.
Paper Tray
This section explains the paper tray settings in the [Paper Tray] menu under [Tray Paper Settings].
Tray 1
This section explains the paper tray settings for Tray 1.
Paper Type
• Plain Paper
• Recycled Paper
• Black
• Color
• Letterhead
• Preprinted Paper
• Prepunched Paper
• Textured Paper
Default: [Plain Paper]
Paper Weight
• Paper Weight 1 (52.3–63.0g/m
2
)
• Paper Weight 2 (63.1–80.0g/m
2
)
• Paper Weight 3 (80.1–105.0g/m
2
)
• Paper Weight 4 (105.1–163.0g/m
2
)
• Paper Weight 5 (163.1–220.0g/m
2
)
• Paper Weight 6 (220.1–256.0g/m
2
)
6. Paper Specifications and Adding Paper
244
To Next Page
Loading...
