Ricoh PRO C7200S - Trays 3 and 5 (when the three-tray wide Large Capacity Tray is installed)

11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 8
1
/
2
× 13
2
/
5
, 4
1
/
5
× 5
1
/
2
,
Custom Size
Default: [Auto Detect]
You can specify a custom size between 100.0 and 330.2 mm (3.94 and 13.00 inches)
vertically, and between 139.7 and 487.7 mm (5.50 and 19.20 inches) horizontally.
When loading paper that is 100.0 to 139.2 mm (3.94 to 5.49 inches) in vertical length,
attach the postcard side fences.
For details about auto detectable paper sizes, see page 207 "Recommended Paper Sizes
and Types".
• If you want to use glossy paper, select [Coated: Glossy] for [Paper Type]. If you want to use
matte paper (including silk, dull, and satin paper), select [Coated: Matte] for [Paper Type].
• The lock mark ( ) is displayed next to the paper tray if [Apply Auto Paper Select] is not
enabled.
Tray 4 (when the three-tray wide Large Capacity Tray is installed)
This section explains the paper tray settings for Tray 4 (when the three-tray wide LCT is installed)
Paper Type
• Plain Paper
• Recycled Paper
• Black
• Color
• Letterhead
• Preprinted Paper
• Transparency
• Tab Stock
• Translucent Paper
• Label Paper
• Coated: High Gloss
• Coated: Glossy
• Coated: Matte
• Envelope
• Envelope: Glossy
• Envelope: Matte
• Envelope: High Gloss
6. Paper Specifications and Adding Paper
250