Ricoh PRO C7200S - Page 256

• Duplex printing is automatically disabled if you select [Label Paper], [Translucent Paper],
[Envelope], [Tab Stock], [Magnet Paper], [Clear File Folder], [Tab Stock: High Gloss],
[Tab Stock: Glossy], [Tab Stock: Matte], [Envelope: High Gloss], [Envelope: Glossy],
[Envelope: Matte], or [Carbonless Paper] for [Paper Type].
Apply Auto Paper Select
• Yes
• No
Default: [Yes]
Paper Size
Auto Detect, A3 , A4 , A5 , A6 , B4 JIS , B5 JIS , B6 JIS ,
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
,
8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 ,
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 8
1
/
2
× 13
2
/
5
, 4
1
/
5
× 5
1
/
2
,
Custom Size
Default: [Auto Detect]
Specify the paper size with the number keys when you select [Custom Size]. The paper sizes
that can be used differ depending on the machine's configuration.
• When the banner sheet tray of two-tray wide LCT is not installed:
Vertical: 100.0–330.2 mm (3.94–13.00 inches), Horizontal: 139.7–487.7 mm (5.50–
19.20 inches)
• When the banner sheet tray of two-tray wide LCT is installed (Tray 3, 5, or 7):
Vertical: 210.0–330.2 mm (8.27–13.00 inches), Horizontal: 420.0–700.0 mm
(16.54–27.55 inches)
For details about auto detectable paper sizes, see page 207 "Recommended Paper Sizes
and Types".
• If you want to use glossy paper, select [Coated: Glossy] for [Paper Type]. If you want to use
matte paper (including silk, dull, and satin paper), select [Coated: Matte] for [Paper Type].
• The lock mark ( ) is displayed next to the paper tray if [Apply Auto Paper Select] is not
enabled.
Multi bypass tray (Tray A)
This section explains the paper tray settings for multi bypass tray (Tray A).
Paper Type
• Plain Paper
6. Paper Specifications and Adding Paper
254