Ricoh PRO C7200S - Machine: Image Position; Menu Items and Functions

No. Item Description
0715 Gate Fold Position 1 Adjust the fold position of the bottom segment 1 of
gatefold sheets when using the fold unit.
0716 Gate Fold Position 2 Adjust the fold position of the bottom segment 2 of
gatefold sheets when using the fold unit.
0717 Gate Fold Position 3 Adjust the fold position of the bottom segment 3 of
gatefold sheets when using the fold unit.
Finishing: Perfect Binder
For details about the following items, see page 337 "Finishing: Perfect Binder".
No. Item Description
0801 Perf Bind Cvr Sht Posit:
Across Feed
Adjust the vertical alignment of the cover sheet position
when performing perfect binding.
0802 Perf Bind Cvr Sht Posit:
With Feed
Adjust the horizontal alignment of the cover sheet
position when performing perfect binding.
0803 Perfect Binding Finishing
Angle
Square the top, bottom, and outside edges when
trimming a deck of paper.
0804 Applying Binding Glue Adjust the amount of binding glue for perfect binding.
Finishing: Stacker
For details about the following items, see page 339 "Finishing: Stacker".
No. Item Description
0901 Ppr Align in Stack Tray: Acr
Feed 1
Adjust the alignment width in Main Jogger
*1
when
output sheets are stacked on the stacker.
0902 Ppr Align in Stack Tray: Acr
Feed 2
Adjust the alignment width in Sub Jogger
*1
when output
sheets are stacked on the stacker.
0903 Paper Alignment in Stacker
Tray: With Feed
Adjust the alignment position of the Tip Stopper when
output sheets are ejected on the Stacker.
0904 Ppr Align in 2nd Stack
Tray: Acr Feed 1
Adjust the alignment width in Main Jogger
*1
when
output sheets are stacked on the 2nd stacker.
7. Adjustment Settings for Operators
282