Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Tray 1
Tray 2
3-Tray LCIT: Tray 3
3-Tray LCIT: Tray 4
3-Tray LCIT: Tray 5
Bypass Tray
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Extended Option Tray
0.00 3.00 -3.00 0.01 mm
• If the paper is delivered face down, turn over the paper horizontally, and check the image position.
• This setting becomes invalid when you are printing from the tray for which custom paper is
allocated. In such case, the value specified in [Image Position: Side 1] under the [Advanced
Settings] of Custom Paper is applied.
0102 Image Position: Across Feed: Side 2
Adjust the image position (up and down) on side 2 across the feeding direction.
Press [ ] or [ ] to shift the image position upward (toward the back) or downward (toward the front).
Setting Values
285
To Next Page
Loading...
