Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Tray 1
Tray 2
3-Tray LCIT: Tray 3
3-Tray LCIT: Tray 4
3-Tray LCIT: Tray 5
Bypass Tray
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Extended Option Tray
0.00 3.00 -3.00 0.01 mm
• If the paper is delivered face down, turn over the paper horizontally, and check the image position.
• This setting becomes invalid when you are printing from the tray for which custom paper is
allocated. Instead, the value specified in [Image Position: Side 2] under the [Advanced Settings] of
Custom Paper is applied.
0105 Perpendicularity Adjustment
Adjust the image skew (perpendicularity) across the feeding direction.
Press [ ] or [ ] to tilt the image to the left (toward the top) or right (toward the bottom).
Paper feed direction
Default
DWP569
Setting Values
289
To Next Page
Loading...
