seconds for [Color Registration]. A message appears on the control panel while the process is in
progress. Do not pull out the front covers while the message is being displayed.
Setting Items Values
Adjust Image Density
Density Difference: With Fd
Color Registration
Press [Execute].
• The machine executes automatic image quality adjustment after a set interval or after printing a
specified number of sheets. However, you can also manually initiate automatic image quality
adjustment whenever you want.
0202 Maximum Image Density
Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment.
When the degree of coloration differs depending on the difference in the degree of pigmentation, adjust
the toner adhesion amount.
Press [ ] or [ ] to increase or decrease the toner adhesion amount.
If you change the setting value, [Adjust Image Density] is automatically performed before the machine
starts printing.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Black
Cyan
Magenta
Yellow
Special
*1
0 5 -5 1 -
*1 Requires the special color expansion kit.
• Toner fixation deteriorates when you increase the toner adhesion amount, and splashing or
smearing of characters and hairlines may occur.
Setting Values
291
To Next Page
Loading...
