False detection may occur when you are using special paper (lapped paper such as label paper).
To prevent it occurring, set the setting to [Off].
This setting is invalid when you are printing from the tray for which custom paper is allocated. In such
case, the value specified in [Detect JAM099] under [Advanced Settings] of Custom Paper is applied.
Setting Items Values Default Value
Tray 1
Tray 2
3-Tray LCIT: Tray 3
3-Tray LCIT: Tray 4
3-Tray LCIT: Tray 5
Bypass Tray
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Extended Option Tray
Off
On
On
0306 Detect JAM080
Specify whether or not to detect error as a paper jam when the image deviation in the feeding direction
exceeds a certain degree.
Setting Values
295
To Next Page
Loading...
