Ricoh PRO C7200S - Page 299

Setting Items Values Default Value
Tray 1
Tray 2
3-Tray LCIT: Tray 3
3-Tray LCIT: Tray 4
3-Tray LCIT: Tray 5
Bypass Tray
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Extended Option Tray
Off
On
On
0308 Detect JAM048
Specify whether or not to detect an error as a paper jam when a problem is detected while the
registration mark is checked for image position correction.
Setting Items Values Default Value
Set Off
On
Off
0310 ADF Adjustment
Adjust the image position and scaling factor when scanning originals on the Auto Document Feeder
(ADF). You can correct the discrepancy, stretching, and shrinkage of originals caused by deviation
during the feeding process.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Img Pos:With Feed:Side1
Img Pos:With Feed:Side2
0.0 5.0 -5.0 0.1 mm
Setting Values
297