Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 SEF
B5 JIS SEF
12 × 18 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
0.0 4.0 -4.0 0.2 mm
8
1
/
2
× 11 SEF 0.0 4.0 0.0 0.2 mm
8K SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0713 Double Parallel Fold Position 1
Adjust the fold position (S1) of the bottom segment 1 of double parallel-folded sheets when using the
fold unit.
Press [ ] to increase and [ ] to reduce (S1).
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge. The illustration below shows a gatefold sheet partially opened in the half-folded state.
Paper feed direction
S1
L1
DWP565
7. Adjustment Settings for Operators
332
To Next Page
Loading...
