Ricoh PRO C7200S - Page 343

*1 A guide for aligning output sheets when they are ejected and delivered to the stacker. The guide is
located inside the stacker.
0903 Paper Alignment in Stacker Tray: With Feed
Adjust the alignment position of the Tip Stopper when output sheets are ejected on the Stacker.
Use the function to reduce the dispersion of paper orientation in the feeding direction due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to decrease or increase the amount of movement.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
A5 LEF
A5 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 LEF
8
1
/
2
× 11 SEF
5
1
/
2
× 8
1
/
2
LEF
5
1
/
2
× 8
1
/
2
SEF
Other Paper Sizes
0.0 1.0 -1.0 0.1 mm
0904 Ppr Align in 2nd Stack Tray: Acr Feed 1
Adjust the alignment width in Main Jogger
*1
when output sheets are stacked on the 2nd stacker.
Use the function to reduce the dispersion of paper orientation at a right angle due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the width.
Setting Values
341