Ricoh PRO C7200S - Print

*1 A guide for aligning output sheets when they are ejected and delivered to the stacker. The guide is
located inside the stacker.
0906 Ppr Align in 2nd Stack Tray: With Feed
Adjust the alignment position of the Tip Stopper when output sheets are ejected on the 2nd stacker.
Use the function to reduce the dispersion of paper orientation in the feeding direction due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to decrease or increase the amount of movement.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
A5 LEF
A5 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 LEF
8
1
/
2
× 11 SEF
5
1
/
2
× 8
1
/
2
LEF
5
1
/
2
× 8
1
/
2
SEF
Other Paper Sizes
0.0 1.0 -1.0 0.1 mm
0907 Maximum Stack Quantity in Stacker Tray
Specify the maximum number of sheets that can be stacked on the stacker tray. The setting applies to
both the 1st and 2nd stackers.
The maximum number of sheets you can set differs depending on the size, thickness, and paper curl. Set
the maximum number by specifying a ratio based on the number of sheets. Select [Large Size] when
using paper whose vertical and horizontal lengths are 210 mm or longer whose area is 8
1
/
2
× 11 or
wider. Select [Small Size] when using other size paper.
Setting Values
343