1. Press [Change] after specifying the path name.
2. Specify the destination computer and a shared folder.
For example, if the computer name is "192.168.0.152" and a shared folder name is
"scan", use "\\192.168.0.152\scan" as the name of the destination folder.
3. Press [OK]
14. Press [Connection Test].
15. When a message indicating that the connection has been successfully established
appears, press [Exit].
• If a message "Cannot find the specified path. Please check the settings." appears, see
page 446 "Messages displayed on the control panel when you use the scanner function".
16. Press [OK].
17. Press [User Tools] ( ) on the top right of the screen.
9. Scan
364
To Next Page
Loading...
