2. Press the [Scanner (Classic)] icon.
3. Insert an SD card or USB flash memory device into the media slot on the machine's control
panel.
For details about inserting an SD card or USB flash memory device into the media slot, see
"Inserting/Removing a Memory Storage Device", Preparation.
4. Make sure that no previous settings remain.
If a previous setting remains, press [Reset].
5. Place originals.
6. Press [Store File].
7. Press [Store to Memory Device].
8. Press [OK].
9. If necessary, specify the scan settings according to the original to be scanned.
Example: Scanning the document in color/duplex mode, and saving as a PDF file.
• Press [Scan Settings], press [Full Color: Text / Photo] in the [Original Type] tab, and then
press [OK].
• Press [Original Feed Type], press [2 Sided Original], and then press [OK].
Storing and Saving the Scanned Documents
397
To Next Page
Loading...
