Ricoh PRO C7200S - Page 432

Message Cause Solution
"Perfect Binding is not
available with this No. of
sheets."
Perfect Binding is not
possible with the number of
sheets that you have
specified.
• Check the number of sheets.
• Specify the proper number of
sheets.
For details about the proper number of
sheets, see "Specifications for Perfect
Binder", Specifications.
"Contains incorrect setting(s)
for Perfect Binding."
Perfect Binding cannot be
used with the paper size that
you have specified.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Perfect Binder",
Specifications.
"Press [Continue] to scan
and copy remaining
originals."
The machine checked if the
remaining originals should
be copied, after the scanned
originals were printed.
Remove all copies, and then press
[Continue] to continue copying. Press
[Stop] to stop copying.
"Ring Binding is not
available for different paper
sizes."
Mixed Sizes mode is
specified.
Cancel Mixed Sizes mode, or specify
the Auto Reduce / Enlarge function.
"Ring Binding is not
available with the selected
position."
Ring Binding cannot be
applied in the position that
you have specified.
Select a proper binding position. For
details about proper binding positions,
see "Ring binding", Basic Operations.
"Ring Binding is not
available with the settings."
Ring Binding is not possible
under the settings that you
have specified.
Check the current settings. For details
about which functions are not
available when Ring Binding is
specified, see "Ring binding", Basic
Operations.
"Ring Binding is not
available with this paper
size."
Ring Binding cannot be used
with the paper size that you
have specified.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Ring Binder",
Specifications.
"Stapling capacity
exceeded."
The number of sheets per set
is over the staple capacity.
Check the stapler capacity. For details
about the stapler capacity, see
"Specifications for Finisher SR5050" or
"Specifications for Booklet Finisher
SR5060", Specifications.
11. Troubleshooting
430