Message Cause Solution
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
• Check that the printer driver
settings are correct, and then
load paper of the size selected
in the printer driver into the
input tray. For details about
how to change the paper size,
see page 190 "Changing the
Paper Size".
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Basic
Operations.
"Paper type of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
The type of the paper in the tray
does not match the paper type
specified in the printer driver.
Select a tray containing paper that is
the same type as the specified paper
type.
"Perfect Binding is not
available with this No. of
sheets."
Perfect Binding is not possible
with the number of sheets that
you have specified.
• Check the number of sheets.
• Specify the proper number of
sheets.
For details about the proper number
of sheets, see "Specifications for
Perfect Binder", Specifications.
"Contains incorrect
setting(s) for Perfect
Binding."
Perfect Binding cannot be used
with the paper size that you
have specified.
Select a proper paper size. For
details about proper paper sizes,
see "Specifications for Perfect
Binder", Specifications.
"Printer font error." An error has occurred in the
font settings.
Contact your service representative.
When Messages Appear
433
To Next Page
Loading...
