Messages printed on the error logs or reports when you use the printer function
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
When print jobs are canceled
Message Cause Solution
"91: Error" Printing was canceled by
the auto job cancel
function due to a command
error.
Check that the data is valid.
"A function which cannot
be used with Fold mode
was set. The job has been
cancelled."
A print job was canceled
because a function(s) not
available with Fold was
selected.
Cancel the function(s) not available
with Fold. For details about the
functions not available with Fold, see
page 32 "Fold".
"A function which cannot
be used with Perfect
Binding was set. The job
was cancelled."
A function not available
with Perfect Binding has
been selected.
For details about which functions are
not available with Perfect Binding,
see page 26 "Perfect Binding".
"A function which cannot
be used with Ring Binding
was set. The job was
cancelled."
A function not available
with Ring Binding has been
selected.
For details about which functions are
not available with Ring Binding, see
page 30 "Ring Binding".
"A job via the network that
was not printed exists
because an error occurred.
It was stored as a job not
printed."
Jobs with errors were
stored because an error
occurred with a print job
via the network while the
error job storing function
was enabled.
Contact your administrator to check
whether the machine is connected
correctly to the network. For details
about how to check and print jobs
stored when print configuration
errors occur, see "Printing of
documents stored when print
configuration errors occur", Basic
Operations.
"Address book is currently
in use by another function.
Authentication has failed."
The address book remains
in use by another function,
and authentication query is
not possible.
Wait for a while and try again later.
When Messages Appear
435
To Next Page
Loading...
