Message Cause Solution
"Duplex Cancelled" Duplex printing was canceled. • Select an appropriate
paper size for the duplex
function. For details
about paper, see
"Specifications for the
Main Unit",
Specifications.
• Change the setting for
"Apply Duplex" in [Tray
Paper Settings] to enable
duplex printing for the
paper tray. For details
about setting "Apply
Duplex", see page 243
"Tray Paper Settings".
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages
to print.
"Exceeded the maximum
number of multi-sheet fold
(Half Fold)."
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
For details about the maximum
number of multi-sheet folds
(Half Fold), see page 32
"Fold".
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
"Perfect Binding is not
available with the settings."
Perfect Binding is not possible
under the settings that you
have specified.
Check the current settings. For
details about which functions
are not available when Perfect
Binding is specified, see
page 26 "Perfect Binding".
When Messages Appear
439
To Next Page
Loading...
