Problem Cause Solution
Copies are not stapled. Copy paper is curled. • Turn the copy paper over in the
tray.
• Straighten the curled sheets using
[Adjustment Settings for
Operators]. For details about the
settings for [Adjust Paper Curl],
see page 271 "Adjustment
Settings for Operators".
Copies are not stapled. The number of copies is too
large for the stapler to staple
the copies as a single batch.
For details about the stapler capacity,
see "Specifications for Finisher
SR5050" or "Specifications for Booklet
Finisher SR5060", Specifications.
Saddle-stitched documents
come apart and do not stack
properly.
Certain types of paper are
resistant to folding and open
out after being folded and
stitched.
For details about the recommended
paper, see page 207 "Recommended
Paper Sizes and Types".
Staples are wrongly
positioned.
Originals are not set
correctly.
For details about how to place the
originals with stapling, see "Staple",
Basic Operations.
Stapled sheets of paper are
not output during printing.
When you stop printing
while using the staple
function, paper not stapled
during printing may be left in
the staple unit.
Press the [Stop] key, and then cancel
copy settings, including stapling.
11. Troubleshooting
480
To Next Page
Loading...
