Ricoh PRO C7200S - Booklet Finisher SR5060

Booklet Finisher SR5060
CDN034
Remove jammed
staples.
Hold the lever,
and then push in
the cartridge.
Open the finisher
front cover.
Pull handle Rb18,
and then pull out
staple unit.
Turn knob Rb19
counterclockwise to
rotate the staple unit.
Pull out the cartridge
gently.
Return the staple unit to its original position.
Close the finisher front cover.
Pull down the face
plate until it clicks.
Push the cartridge until it clicks.
Pull out the
cartridge lever.
Open the face
plate of the
cartridge.
11. Troubleshooting
512