• Waste toner bottles cannot be reused.
• Before removing the waste toner bottle from the machine, spread paper or some other material
around the area to keep toner from dirtying your workspace.
• When removing the waste toner bottle, do not touch the inside of the machine.
• Be careful to not allow the toner to leak from the waste toner bottle when you remove it.
• Carefully pull the waste toner bottle out horizontally when you are replacing it.
• Do not use a waste toner bottle that has not been used for a long time.
• Take care not to drop the waste toner bottle.
• Make sure the waste toner bottle is fully inserted. If it is not, toner will leak inside the machine.
• We recommend purchasing and keeping a spare waste toner bottle on hand since waste toner
bottles are consumable items.
Follow the instruction on the control panel regarding how to replace a waste toner bottle.
• Replace the waste toner bottle if "Waste Toner Bottle is full. Replace Waste Toner Bottle." appears
on the control panel.
• When the "Replacement of Waste Toner Bottle will soon be necessary." appears on the control
panel, the waste toner bottle should be replaced soon. Prepare a new waste toner bottle.
• Your service representative can replace the waste toner bottle if it is included in your contract. For
details, contact your local dealer or service representative.
Adding staples
• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
Follow the instruction on the control panel regarding how to add staples.
• If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the
staples, and do not add more.
12. Maintenance
526
To Next Page
Loading...
