1. Power lamp
Lights up when a USB cable is connected and the Media Identification Unit is ready to start scanning paper.
2. Scanning lamp
Lights up when paper is inserted into the scanning area.
After the paper is removed, it flashes while paper is being scanned.
3. Error lamp
Lights up when an error occurs.
4. Paper scanning area
Insert the paper you want to scan here.
Connect the Media Identification Unit
1. Connect the USB cable to the USB slot on the back of the control panel.
• USB slot
How to register paper scanned by the Media Identification Unit as custom paper
Registering a paper from the master library with the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Press [CustomPaper Management].
4. Press [Import].
5. Select [From Master Library].
Registering Custom Paper
51
To Next Page
Loading...
