Rigol DS1104Z Programming Guide

Chapter 2 Command System RIGOL
DS1000Z Programming Guide 2-49
:MASK:OUTPut
Syntax :MASK:OUTPut <bool>
:MASK:OUTPut?
Description Enable or disable the sound prompt when the failed waveforms are detected, or query the
status of the sound prompt.
Parameter
Name Type Range Default
<bool>
Bool
{{0|OFF}|{1|ON}}
0|OFF
Explanation  OFF: when failed waveforms are detected, there are display and output but the
beeper does not sound.
 ON: when failed waveforms are detected, there are display and output and the
beeper sounds (not related to the on/off state of the sound).
Return
Format
The query returns 0 or 1.
Example
:MASK:OUTPut ON
:MASK:X
Syntax :MASK:X <x>
:MASK:X?
Description
Set or query the horizontal adjustment parameter in the pass/fail test mask.
Parameter
Name
Type
Range
Default
<x> Real 0.02 to 4 0.24
Explanation
The step is 0.02 within the range.
Return
Format
The query returns the horizontal adjustment parameter in scientific notation.
Example
:MASK:X 0.28 /*Set the horizontal adjustment parameter to 0.28div*/
:MASK:X? /*The query returns 2.800000e-01*/
:MASK:Y
Syntax :MASK:Y <y>
:MASK:Y?
Description
Set or query the vertical adjustment parameter in the pass/fail test mask.
Parameter
Name
Type
Range
Default
<y>
Real
0.04 to 5.12
0.48
Explanation
The step is 0.04 within the range.
Return
Format
The query returns the vertical adjustment parameter in scientific notation.
Example
:MASK:Y 0.36 /*Set the vertical adjustment parameter to 0.36div*/
:MASK:Y? /*The query returns 3.600000e-01*/

Rigol DS1104Z Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Interface	USB Host, USB Device, LAN, AUX
Display	7 inch TFT LCD (800 x 480)
Trigger Types	Edge, Pulse, Video, Slope
Power Supply	100-240 V, 45-440 Hz
Memory Depth	24 Mpts (Single Channel), 12 Mpts (Dual Channel)