Rigol DS1104Z Programming Guide

Chapter 2 Command System RIGOL
DS1000Z Programming Guide 2-79
:SYSTem:PON
Syntax :SYSTem:PON <pon>
:SYSTem:PON?
Description Set or query the system configuration to be recalled when the oscilloscope is powered on
again after power-off.
Parameter
Name
Type
Range
Default
<pon>
Discrete
{LATest|DEFault}
LATest
Return
Format
The query returns LAT or DEF.
Example
:SYSTem:PON LATest
:SYSTem:OPTion:INSTall
Syntax
:SYSTem:OPTion:INSTall <license>
Description
Install the option.
Parameter
Name
Type
Range
Default
<license> ASCII String
Option serial number supplied by RIGOL
No spaces between characters.
None
Example
:SYSTem:OPTion:INSTall PDUY9N9QTS9PQSWPLAETRD3UJHYA
:SYSTem:OPTion:UNINSTall
Syntax
:SYSTem:OPTion:UNINSTall
Description
Uninstall the options installed.

Rigol DS1104Z Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Interface	USB Host, USB Device, LAN, AUX
Display	7 inch TFT LCD (800 x 480)
Trigger Types	Edge, Pulse, Video, Slope
Power Supply	100-240 V, 45-440 Hz
Memory Depth	24 Mpts (Single Channel), 12 Mpts (Dual Channel)