Rigol DS1104Z Programming Guide

Chapter 2 Command System RIGOL
DS1000Z Programming Guide 2-121
:TRIGger:RS232 (Option)
Command List:
 :TRIGger:RS232:SOURce
 :TRIGger:RS232:WHEN
 :TRIGger:RS232:PARity
 :TRIGger:RS232:STOP
 :TRIGger:RS232:DATA
 :TRIGger:RS232:WIDTh
 :TRIGger:RS232:BAUD
 :TRIGger:RS232:BUSer
 :TRIGger:RS232:LEVel
:TRIGger:RS232:SOURce
Syntax :TRIGger:RS232:SOURce <source>
:TRIGger:RS232:SOURce?
Description
Set or query the trigger source in RS232 trigger.
Parameter
Name
Type
Range
Default
<source> Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4} CHANnel1
Return Format
The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Example
:TRIGger:RS232:SOURce CHANnel2
:TRIGger:RS232:WHEN
Syntax :TRIGger:RS232:WHEN <when>
:TRIGger:RS232:WHEN?
Description
Set or query the trigger condition in RS232 trigger.
Parameter
Name
Type
Range
Default
<when>
Discrete
{STARt|ERRor|PARity|DATA}
STARt
Explanation  STARt: trigger on the start frame position.
 ERRor: trigger when error frame is detected.
 PARity: trigger when check error is detected.
 DATA: trigger on the last bit of the preset data bits and even-odd check bits.
Return Format
The query returns STAR, ERR, PAR or DATA.
Example
:TRIGger:RS232:WHEN ERRor
Related
Command
:TRIGger:RS232:DATA

Rigol DS1104Z Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Interface	USB Host, USB Device, LAN, AUX
Display	7 inch TFT LCD (800 x 480)
Trigger Types	Edge, Pulse, Video, Slope
Power Supply	100-240 V, 45-440 Hz
Memory Depth	24 Mpts (Single Channel), 12 Mpts (Dual Channel)