Proximity tags can be deleted by the Grand Master, and also by the system user (his/her tag
only).
The Grand Master can delete Proximity tags (including the Grand Master's) by the following
methods:
• By index number—if the user's index number is known
• By tag—if the user's index number is not known
System users (not including Grand Master) can delete their own Proximity tags by a
different procedure – see Deleting My Own Proximity Tag, page 23.
Deleting a Proximity Tag by its Index Number
➢ To delete a Proximity tag by its index number:
1. Enter your Grand Master code, and then press OK.
2. Scroll to the Codes/Tags menu, and then press OK.
3. At Define press OK.
4. Scroll to the user index number (001—499) for which you will delete a Proximity tag – or
scroll to Grand Master to delete your Proximity tag, and then press OK.
5. Scroll to Delete Tag, and then press OK.
6. At the confirmation prompt, use the Partial Arm button (see table in Keypad Buttons,
page 12) to toggle to Y (yes) to delete, or to N (no) to cancel the operation, and then press
OK; the system sounds a beep to confirm the deletion.
To Next Page
Loading...
