➢ To view the event log:
1. At the keypad, enter your Grand Master code, and then press OK.
2. Scroll to Event Log, and then press OK.
3. Scroll through the various events to view their description and time/date of occurrence.
NOTE: Use the Partial Arm (toggle) button (see table in Keypad Buttons, page 12) to skip
100 events, either forwards or backwards.
Viewing Alarm Memory
View the 5 most recent alarms stored in the system memory.
➢ To view the 5 most recent alarms:
1. At the keypad, enter your Grand Master or user code, and then press OK.
2. Scroll to View and then press OK.
3. Scroll to Alarm Memory and then press OK.
4. Scroll to view the alarms.
Viewing System Troubles
A flashing power icon ( ) on the keypad indicates there are current troubles in the system
that you can view.
➢ To view all system troubles:
1. At the keypad, enter your Grand Master or user code, and then press OK.
2. Scroll, to View and then press OK.
3. Scroll to Trouble and then press OK.
4. Scroll to view current troubles found in the system.
Viewing Zone Status
View the status of all zones in the system.
➢ To view zone status:
1. At the keypad, enter your Grand Master or user code, and then press OK.
2. Scroll, to View and then press OK.
3. Scroll to Zone Status and then press OK.
4. Scroll through the zones to view their current status.
To Next Page
Loading...
