Arming & Disarming the System
System arming protects the premises by triggering alarms and sending notifications upon
detection from any installed detector. System users can arm/disarm the system according to
their user authority level.
Arming/Disarming Modes
LightSYS Plus offers the following modes of arming/disarming the system:
✓ Full ("Away") arming
✓ Partial ("Stay" or "Home") arming
✓ Partition arming
✓ Group arming
✓ Automatic arming and disarming
✓
✓ Arming with system troubles
✓ Forced arming (arming with automatically- bypassed zones)
✓ Bypassing zones (arming with manually-bypassed zones)
✓ Keyswitch arming
✓ Forced keyswitch or Proximity arming
✓ Low-battery arming
✓ Strobe arming
✓ Disarming all partitions
✓ Disarming an individual partition
✓ Duress disarming
✓ Disarming with alarm activation (silencing an alarm)
Before Arming the System
IMPORTANT: Before arming the system, do the following:
✓ Ensure the premises have been vacated. Note that the entry/exit delay provides a specific
period of time to exit the premises before alarms are activated.
✓ Observe the system's status indicators, troubles, and READY status:
• Check status indicators – View icon indicators on keypad displays, or LED
indicators on Slim keypads and remote controls. Also listen to any audible
system status (beeps/squawks, or voice announcements). See Appendix C:
System Indicators, page 85.
To Next Page
Loading...
