Activating Emergency Alarms
All RISCO keypads are equipped with specific buttons to use for quick activation of
emergency alarms:
• Panic ("Police") alarm
• Fire alarm
• Auxiliary / emergency alarm
• Duress-Disarming alarm
NOTE: RISCO 4-button keyfobs and 8-button remote controls can also be used to also
activate Panic alarms – ask your installer.
Upon alarm activation, monitoring station(s) can be automatically notified, which in turn
contact responding agencies (fire, police, etc.). See Compliance Statement
Hereby, RISCO Group declares that the LightSYS Plus is designed to comply with:
• EN50131-1
• EN50131-3 Grade 3, Environmental Class II for Housing RP512B and RP432BP3
• EN50131-3 Grade 2, Environmental Class II for Housing RP432BP
• EN50131-6 Type A
• EN50136-1
• EN50136-2
• EN50131-10 SPT Type Z
• PD6662:2017
• Compatibility with serial interface with AS
• Compatibility with GPRS protocol
• Compatibility with TCP/IP protocol
• Control Panel method of operation: Pass-through
• Signaling security: Substitution security S2
• Information security I3
Alarm Transmission System Classification and Categories:
• GSM 2G/3G/4G (SP5)
• IP/Wi-Fi (SP6)
• GSM primary and IP/ Wi-Fi secondary (DP4),
• IP/ Wi-Fi primary and GSM secondary (DP4)
EN50136 Compliance:
To Next Page
Loading...
